Hugh Reed Hugh Reed's Profile Page

Hugh Reed Hugh Reed

0 Course Enrolled • 0 Course Completed

Biography

NCP-MCA완벽한시험공부자료시험준비에가장좋은인기시험공부문제

Itexamdump의 Nutanix인증 NCP-MCA덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는Itexamdump의 Nutanix인증 NCP-MCA덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희Nutanix인증 NCP-MCA덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.

Nutanix NCP-MCA 시험요강:

주제
소개

주제 1

Demonstrate an understanding of how to utilize Calm built-in macros within blueprints
Determine how to use Calm to complete pre-provisioning step

주제 2

Create a blueprint to deploy infrastructure and applications using Calm
Demonstrate an understanding of how to retire a managed application

주제 3

Demonstrate an understanding of prerequisites for Calm deployment
Identify blueprint features to include authentication credentials in a cloudinit and sysprep

주제 4

Demonstrate an understanding of Calm managed infrastructure and applications
Demonstrate an understanding of how to create a Calm blueprint

주제 5

Demonstrate an understanding of how to create a Playbook by setting a trigger and defining actions
Demonstrate an understanding of how to create Categories

주제 6

Understand the typical causes of a blueprint deployment failure
Validate Blueprints, Playbooks, and Automation Settings

주제 7

Understand the typical causes of issues associated with automation
Given an issue with Playbooks, locate troubleshooting data and collect the logs

주제 8

Given a Category and a blueprint, infer is a policy will be applied to a VM
Describe and Differentiate Automation Concepts and Principles

주제 9

Demonstrate an understanding of how to correctly arrange Playbook steps using X-Plan
Determine and apply the steps required to automate a given manual process

주제 10

Explain how to optimize a workflow to align with best practices
Apply typical configuration settings to a Calm deployment

주제 11

Recall the requirements for setting up environments within Calm to deploy to various supported Clouds
Demonstrate an understanding of event-driven Playbooks

Nutanix NCP -MCA (Certified Professional -Multicloud Automation) 인증 시험은 Multicloud Automation에서 후보자의 지식과 기술을 평가하도록 설계된 테스트입니다. 이 시험은 Nutanix 기술을 사용하여 다중 클라우드 환경을 자동화하고 관리하는 후보자의 능력을 검증하기 위해 고안되었습니다. 이 시험에는 Nutanix Calm, Nutanix XI IoT 및 Nutanix Flow와 같은 다양한 주제가 다릅니다.

>> NCP-MCA완벽한 시험공부자료 <<

시험준비에 가장 좋은 NCP-MCA완벽한 시험공부자료 최신 덤프공부

IT인증시험이 다가오는데 어느 부분부터 공부해야 할지 망설이고 있다구요? 가장 간편하고 시간을 절약하며 한방에 자격증을 취득할수 있는 최고의 방법을 추천해드립니다. 바로 우리Itexamdump IT인증덤프제공사이트입니다. Itexamdump는 고품질 고적중율을 취지로 하여 여러분들인 한방에 시험에서 패스하도록 최선을 다하고 있습니다. Nutanix인증NCP-MCA시험준비중이신 분들은Itexamdump 에서 출시한Nutanix인증NCP-MCA 덤프를 선택하세요.

최신 Nutanix Certified Professional NCP-MCA 무료샘플문제 (Q29-Q34):

질문 # 29
An administrator has been manually performing routine tasks on a set interval that are listed below:
1. Acknowledging Alerts
2. Generating Reports
3. Looking up cluster details
As the environment grows, these tasks will become cumbersome to run and maintain accuracy.
Which trigger type should the administrator implement in order for these actions to occur on a set interval.

A. Time Trigger
B. Event Trigger
C. Manual Trigger
D. Webhook trigger

정답：A

설명：
To automate routine tasks such as acknowledging alerts, generating reports, and looking up cluster details on a set interval, the administrator should implement a Time Trigger. Time Triggers allow actions to be scheduled to run at specific times or intervals, ensuring consistent execution without manual intervention.
References:
* Nutanix Calm documentation on Triggers.
* Nutanix Best Practices for Automating Routine Tasks.

질문 # 30
A developer has been asked to ensure that when a Blueprint is executed. an IP address is reserved in the IPAM system before the execution can continue. The developer must achieve this with the least amount of work.
How should the developer satisfy this requirement?

A. Use an application profile.
B. Use an HTTP task.
C. Use Service dependency.
D. Use a Pre-create task.

정답：B

설명：
An HTTP task is a type of task that can be added to a blueprint or a runbook to perform REST API calls to external systems. An HTTP task can be used to reserve an IP address in the IPAM system before deploying a VM or an application, by sending a POST request with the required parameters and headers. The HTTP task can also capture the response from the IPAM system and store it as a variable for later use. This is the simplest and most efficient way to integrate with an IPAM system, as it does not require any additional configuration or scripting.
References:
* Nutanix Multicloud Automation Administration (NMCAA) Course, Module 2: Self-Service, Lesson 2.4:
Creating and Managing Blueprints, Slide 23: HTTP Task
* Nutanix Certified Professional - Multicloud Automation (NCP-MCA) Exam Blueprint Guide, Section 2:
Deploy and Configure Self-service and Related Components, Objective 2.1: Given a scenario, create a blueprint to deploy infrastructure and applications using Self-Service

질문 # 31
Refer to exhibits.

The variable VM_NAME is giving a warning that indicates that the variable is not found. When checking the Service tab, the variable is found to match the VM_NAME field entry as shown in the exhibit below:

What is causing this warning message?

A. @@{calm_time}@@ output is longer than allowed for a Service Name
B. VM_NAME variable must be defined under Application Profile
C. User modifiable variable for VM_NAME is not allowed
D. Service Name matches the variable name

정답：C

설명：
https://portal.nutanix.com/page/documents/details?targetId=Nutanix-Calm-Admin-Operations-Guide-v3_6_2:nu

질문 # 32
An administrator is creating a Single VM blueprint to deploy a windows 2019 Server.
As part of the package install phase of the deployment a task is needed to join the newly-provisioned server to an Active Directory domain.
In which order should the administrator correctly complete this task?

정답：

설명：

Explanation:
To complete the task of joining a newly-provisioned Windows 2019 Server to an Active Directory domain as part of the package install phase, follow these steps in the correct order:
* Step 1: Add a task to the Package Install section.
* Step 2: Choose Execute as the task type.
* Step 3: Choose Powershell as the script type.
* Step 4: Select the appropriate Credential.
* Step 5: Write/insert the Powershell script contents into the script window.
Add a task to the Package Install section: This sets up the task within the phase where packages and scripts are to be executed.
Choose Execute as the task type: This specifies that the task will run a script or command.
Choose Powershell as the script type: Since joining a Windows Server to a domain typically involves running a PowerShell script, this is the appropriate script type.
Select the appropriate Credential: Use the credentials with the necessary permissions to join the server to the Active Directory domain.
Write/insert the Powershell script contents into the script window: Enter the PowerShell script that performs the domain join operation.
Add-Computer -DomainName "yourdomain.com" -Credential (Get-Credential) -Restart References:
* Nutanix Calm documentation on Script Execution in Blueprints.
* Nutanix Best Practices for Joining a Domain.

질문 # 33
Refer to the exhibit.

A Blueprint fails on executing a check-login task against a Windows 2016 VM and displays the error shown in the exhibit. The administrator is using a SSH key-based credential to authenticate the task.
What should the administrator change to resolve the issue?

A. Increase the retries to allow for the task to complete.
B. Change to password authentication credential.
C. Ensure the private key for the credential is correct.
D. Modify the timeout to give the task longer to complete.

정답：C

질문 # 34
......

Itexamdump사이트에서 제공해드리는 Nutanix NCP-MCA덤프는 실러버스의 갱신에 따라 업데이트되기에 고객님께서 구매한Nutanix NCP-MCA덤프가 시중에서 가장 최신버전임을 장담해드립니다. Nutanix NCP-MCA덤프의 문제와 답을 모두 기억하시면Nutanix NCP-MCA시험에서 한방에 패스할수 있습니다.시험에서 불합격 받으시면 결제를 취소해드립니다.

NCP-MCA덤프샘플 다운: https://www.itexamdump.com/NCP-MCA.html

Hugh Reed Hugh Reed

Biography

Quick Links

Resources

Support